For a fraction of the cost of any comparable machine, the Neutec
J-2R delivers superior castings and greater production capacity. Manufactured using the best components available, this exceptional machine combines advanced technology with practical design to give you the casting capability you need today and well into the future.

The J-2R is absolutely the easiest casting system to set up, use and maintain, and it delivers quality castings and outstanding operational reliability. You can be ready to cast again 6–8 minutes after each pour, keeping your production moving all day long.

The J-2R provides an oxygen-free atmosphere for the metal during melting and pouring to help eliminate oxidation. The large-volume graphite crucible also removes oxygen that may previously have been dissolved in the metal. This means fewer defects and lower reject rates.

Cast at the optimum temperature for any design without overheating the metal. The J-2R measures the metal temperature in the center of the metal pool, giving you accurate casting temperatures. The crucible is a bottom-pour design, so there is very little drop in metal temperature from crucible to flask.

After initial warm-up, the casting cycle time of the J-2R is a fast 6–8 minutes, depending on load size. The large-volume crucible holds 1004g of 14KY or 78g of sterling. The casting chamber accommodates flask sizes from 2-1/2" to 4" in diameter and up to 9" high.

Simple to install and operate in only three square feet of bench space, the J-2R requires only that you set the temperature controller for the desired casting temperature, add the casting grain to the crucible, insert the flask and (when set temperature is reached) squeeze the casting lever.